12kv Unscreened Separable Connector/Loadbreak Cable Connector

This insulating adapter RUJT-1 (630 A) is for the connection on outer cone bushings Type C according to EN-50181. 

It is compatible with  cable terminations and can be used to connect paper or plastic insulated or has one or three cores. The insulated adapter termination system provides perfect sealing, electrical insulation and an electrical connection between the cable terminations and SF6-insulated switchgear up to 24 kV. The compact design of the adapters and their clear cut profiles simplify installation. The electrical connection with the aid of a stud renders additional fastening systems unnecessary. The adapters are watertight and can operate under extreme environmental conditions with severe pollution.

Thick walled insulating boot made of high quality elastomer with sealing face over the termination, bushing cone and plug. The electrical connection is made with a terminal stud and the cable lug of the termination. Two cable connection is possible. A special plug which allows cable testing without disconnecting the adapter is also offered.

Kit Contents: 3 x insulating boots , 3 x Silicone Grease ,3 x Cleaning papers, 3 x Stainless steel bolts with nuts,3 x Terminal studs,1 x Installation Instruction